ARM support

Open3D provides experimental support for 64-bit ARM architecture (arm64 or aarch64) on Linux and macOS (Apple Silicon). Starting from Open3D 0.14, we provide pre-compiled ARM64 wheels for Linux and macOS. Install the wheel by:

pip install open3d
python -c "import open3d; print(open3d.__version__)"

# Test the legacy visualizer
python -c "import open3d as o3d; c = o3d.geometry.TriangleMesh.create_box(); o3d.visualization.draw_geometries([c])"

# Test the new GUI visualizer
python -c "import open3d as o3d; c = o3d.geometry.TriangleMesh.create_box(); o3d.visualization.draw(c)"

	Linux (OpenGL)	Linux (OpenGL ES)	macOS	Windows on ARM
pip install open3d	Yes	Yes	Yes	No
Compile from source	Yes	Yes	Yes	No
Visualizer and GUI	Yes	No	Yes	No
Non-GUI features	Yes	Yes	Yes	No
Special build flags	Not needed	-DBUILD_GUI=OFF	Not needed	N/A
Example device	Nvidia Jetson	Raspberry Pi 4	M1 MacBook	Surface Pro X

Additional notes:

• On Linux, check the output of uname -p and it should show aarch64. On macOS, check the output of uname -m and it should show arm64.

• Full OpenGL (not OpenGL ES) is needed for Open3D GUI. Open3D GUI is supported on Nvidia Jetson platforms and on Apple ARM64 devices.

• If the full OpenGL is not available (e.g. on Raspberry Pi devices), the Open3D GUI code will compile but it won’t run. In this case, we recommend setting -DBUILD_GUI=OFF during the cmake configuration step.

• For Windows on ARM devices, Open3D might work with the x86 emulation layer, but it is not official supported.

• Open3D installed via pip install open3d will not contain CUDA support on ARM64 platforms. To use CUDA, you need to compile Open3D with CUDA manually for Nvidia Jetson boards.

Compiling Open3D on ARM64 Linux

Building Open3D Python Wheel with Docker

This is recommended for Python users. By using Docker, the only dependency to install is the Docker engine itself. This is especially useful since ARM64 Linux has many variants and it could be difficult to configure all dependencies manually.

To build Open3D Python wheel with Docker, you can run one of the following commands:

cd docker

./docker_build.sh openblas-arm64-py38   # Python 3.8
./docker_build.sh openblas-arm64-py39   # Python 3.9
./docker_build.sh openblas-arm64-py310  # Python 3.10
./docker_build.sh openblas-arm64-py311  # Python 3.11

After running docker_build.sh, you shall see a .whl file generated the current directly on the host. Then simply install the .whl file by:

# Optional: activate your virtualenv
conda activate your-virtual-env

# Install and test
pip install open3d-*.whl
python -c "import open3d; print(open3d.__version__)"
python -c "import open3d as o3d; c = o3d.geometry.TriangleMesh.create_box(); o3d.visualization.draw_geometries([c])"
python -c "import open3d as o3d; c = o3d.geometry.TriangleMesh.create_box(); o3d.visualization.draw(c)"

The ./docker_build.sh script works on both Linux and macOS ARM64 hosts. You can even cross-compile an ARM64 wheel on an x86-64 host. Install Docker and Qemu:

sudo apt-get --yes install qemu binfmt-support qemu-user-static

and follow the same steps as above.

Building Open3D directly

You may run into issues building Open3D directly on your ARM64 machine due to dependency conflicts or version incompatibilities. In general, we recommend building from a clean OS and only install the required dependencies by Open3D. It has been reported by users that some globally installed packages (e.g. TBB, Parallel STL, BLAS, LAPACK) may cause compatibility issues if they are not the same version as the one used by Open3D.

If you only need the Python wheel, consider using the Docker build method or install Open3D via pip install open3d directly.

Install dependencies

# Install dependencies
./util/install_deps_ubuntu.sh

# Optional: ccache is recommended to speed up subsequent builds
sudo apt-get install -y ccache

# Check cmake version, you should have 3.19+
cmake --version

If the Open3D build system complains about CMake xxx or higher is required, refer to one of the following options:

• Compile CMake from source

• Download the pre-compiled aarch64 CMake from CMake releases, and setup PATH accordingly.

• Install with pip (run inside a Python virtual environment): pip install cmake

Build

# Optional: activate your virtualenv
conda activate your-virtual-env

# Configure
# Set -DBUILD_CUDA_MODULE=ON if CUDA is available (e.g. on Nvidia Jetson)
# Set -DBUILD_GUI=ON if full OpenGL is available (e.g. on Nvidia Jetson)
cd Open3D && mkdir build && cd build
cmake -DBUILD_CUDA_MODULE=OFF -DBUILD_GUI=OFF ..

# Build
make -j$(nproc)
make install-pip-package -j$(nproc)

# Test C++ viewer app (only available when -DBUILD_GUI=ON)
./bin/Open3D/Open3D

# Test Python visualization (only available when -DBUILD_GUI=ON)
python -c "import open3d; print(open3d.__version__)"
python -c "import open3d as o3d; c = o3d.geometry.TriangleMesh.create_box(); o3d.visualization.draw_geometries([c])"
python -c "import open3d as o3d; c = o3d.geometry.TriangleMesh.create_box(); o3d.visualization.draw(c)"

Compiling Open3D on ARM64 macOS

# Dependencies
brew install gfortran

# Optional: ccache is recommended to speed up subsequent builds
sudo apt-get install -y ccache

# Optional: activate your virtualenv
conda activate your-virtual-env

# Configure
cd Open3D && mkdir build && cd build
cmake ..

# Build
make -j8
make install-pip-package -j8

# Test C++ viewer app
./bin/Open3D/Open3D

# Test Python visualization
python -c "import open3d; print(open3d.__version__)"
python -c "import open3d as o3d; c = o3d.geometry.TriangleMesh.create_box(); o3d.visualization.draw_geometries([c])"
python -c "import open3d as o3d; c = o3d.geometry.TriangleMesh.create_box(); o3d.visualization.draw(c)"